SecurityMan PanBase Use and Care Manual download pdf (Page 13)

2) Press the left button (ON/OFF button) again and the Pan

Base will stop.

3) While rotating, press the right button (Rotation button) at

any time to change the rotating direction.

4) If you want to turn on or turn off the Pan Base, press the

left button (ON/OFF button) twice respectively.

5) Point the remote control towards the Pan Base antenna.

The remote distance should be in specification range (up to

50 meter line of sight).

6) The 12V DC power cable (for security camera) must be

stretched out to allow the camera to rotate properly.

7) To install, place the nylon gel areas of the Pan Base bot-

tom to the desired location. Then screw and tighten the

bolts accordingly.

Troubleshooting

If the remote control and Pan Base do not work, please

check the following:

1) is the battery inside the remote control drained or is the

battery installed correctly?

2) is the antenna extracted out and away from the remote

control?

3) ensure that the receiving antenna on the Pan Base is not

circled around the power cord?

4) if the Pan Base is connected properly with correct power

adapter?

5) if the remote control is used within the remote control

range (up to 50 meter line of sight)?

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

SecurityMan PanBase Use and Care Manual Page 13