Securityman DigiAir-SD User Manual download pdf (Page 18)

SD Format

Camera Rotation

In the System Setting highlight and press the OK button on the Camera Rotation as shown below.

The Auto Sequence is use to setup the camera sequential rotation period between cameras. The

default Auto Sequence is set to OFF. To change the value, press the UP or DOWN buttons to toggle

between OFF, 5 sec, 10 sec, 15 sec, 25 sec, or 30 sec. Press OK to save and exit out of Auto

Sequence or press the MENU button to exit without changes. If a time value is selected, there will

be an “A” icon showing on the upper right of the screen to indicate that the Auto Sequence is on.

Note: Auto Sequence will still display pitch black image even if the camera is not present when

the camera is checked.

SD Format

In the System Setting highlight and press the OK button on SD Format as shown below.

A message stating “Format will erase all data, continue?” will appear in red, press the UP or DOWN

buttons to select YES or NO (default) accordingly to proceed with the SD (Secure Digital) formatting

options. If YES is selected the entire SD card will be formatted and everything inside will be erase and

cannot be retrieve. Highlight YES and press OK at anytime to proceed with formatting the SD card or

press MENU to exit without formatting.

NOTE: Please remember to backup all the important data (Video/Picture) first, before attempting

to format. ALL DATA WILL BE LOST.

Default Setting

In the System Setting highlight and press the OK button on System Reset as shown below.

Auto Sequence

Sequential Setting

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25 26

No comments

Securityman DigiAir-SD User Manual Page 18