SecurityMan iCamDVR User Manual download pdf (Page 30)

Figure 39 - Auto Mail Server Setup

Figure 40 - Message Sent Successfully Test

Figure 41 - Alarm Email Attachment Setup

29 | SecurityMan

After mail server setup is complete, click on the “Send

Mail Test” button to test if the account setup can be sent.

If all settings are okay, a message “Message Sent Success-

fully” will appear as shown below in gure 40.

If the settings are not input in correctly or wrong, there will

be some pop-up window showing corresponding warning

message. Please check with your local email(s) provider

for the correct SMTP, Port, User Name, and Password.

Check the “Attachment” selection to enable picture at-

tachments via email. When the alarm triggered the pres-

ent live image will be sent to the appointed mailbox by

ways of attachment(s) as illustrated in gure41 below.

Camera Name, Display Time, Image Format, and Resolu-

tion can be selected and setup as desired to enhanced and

help identify the image attached when an event occurred.

The Set Mail Interval ranges from 5, 10, 20, 30, 60, 120

(2min), 300 (5min), 600 (10min) seconds. This is the dwell

time that it will take before an additional email to be active

until the next event email occurs. During the dwell time

or Set Mail Interval time if any events occurred during

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 82 83

No comments

SecurityMan iCamDVR User Manual Page 30